Skip to content

Snake Plant Brown Tips What’s Causing Them and How to Fix It

Snake Plant Brown Tips Whats Causing Them and How to Fix It

snake plant has brown tips


Snake Plant Brown Tips

Snake Plant Brown Tips

Snake plants are popular houseplants because they are easy to care for.

However, one common problem that snake plant owners encounter is brown tips..

There are a few different reasons why this might happen, and the best way to fix it depends on the cause.

In this article, we will discuss the causes of brown tips on snake plants, how to prevent them, and how to treat them if they do occur. We will also provide some home remedies for brown tips on snake plants.

snake plant has brown tips

Causes of Brown Tips on Snake Plants

There are a few different reasons why the tips of your snake plant might be browning. The most common causes are:

  • Not enough water
  • Too much water
  • Not enough sunlight
  • Insect infestation
  • Disease

Let’s take a closer look at each of these causes and how to identify them.

Not Enough Water

Snake plants are succulents, which means that they are adapted to dry conditions. However, they can still get too dry if they are not watered regularly. When a snake plant is not getting enough water, the leaves will start to turn brown at the tips. The browning will progress inward towards the center of the leaf, and the leaf may eventually fall off.

To determine if your snake plant is not getting enough water, check the soil. The soil should be dry to the touch about an inch below the surface. If the soil is dry, water the plant thoroughly until water comes out of the drainage holes in the bottom of the pot.

Too Much Water

Snake plants can also get too much water if they are watered too frequently. When a snake plant is overwatered, the roots will start to rot. The rot will cause the leaves to turn brown and wilt. The leaves may also fall off.

To determine if your snake plant is getting too much water, check the soil. The soil should be moist, but not wet or soggy. If the soil is wet or soggy, reduce the frequency of watering.

Not Enough Sunlight

Snake plants need bright, indirect sunlight to thrive.

If they do not get enough sunlight, the leaves will start to turn brown..

The browning will start at the tips of the leaves and progress inward towards the center of the leaf. The leaf may eventually fall off.

To determine if your snake plant is not getting enough sunlight, move it to a spot that gets more light. The plant should get at least 6 hours of bright, indirect sunlight per day.

Insect Infestation

Snake plants can also be infested with insects, such as mealybugs, aphids, and spider mites. These insects can suck the sap out of the leaves, which can cause the leaves to turn brown. The browning will start at the tips of the leaves and progress inward towards the center of the leaf. The leaf may eventually fall off.

To determine if your snake plant is infested with insects, look for small, white, cottony growths on the leaves. These growths are mealybugs. You may also see small, green or brown insects on the leaves. These insects are aphids or spider mites.

To treat an insect infestation, you can use a commercial insecticidal soap or neem oil. Follow the directions on the product label for application.

Disease

Snake plants can also develop diseases, such as root rot, leaf spot, and powdery mildew. These diseases can cause the leaves to turn brown. The browning will start at the tips of the leaves and progress inward towards the center of the leaf. The leaf may eventually fall off.

To determine if your snake plant has a disease, look for signs of damage, such as brown spots or lesions on the leaves. You may also see a white, powdery growth on the leaves.

See also
Sansevieria Cylindrica Dry Tips and How to Fix Them

To treat a disease, you can use a fungicide. Follow the directions on the product label for application.

<

Topic Answer
Snake plant A type of succulent plant that is native to Africa.
Brown tips A condition that occurs when the tips of the leaves on a snake plant turn brown.
Succulent A type of plant that is able to store water in its leaves, stems, or roots.
Plant care The steps that are necessary to keep a plant healthy and thriving.
Houseplant A plant that is grown indoors for decoration or to improve air quality.

ICauses of Brown Tips on Snake Plants

There are a few different reasons why the tips of your snake plant may be browning.

  • Not enough water
  • Too much water
  • Not enough sunlight
  • Too much fertilizer
  • Insect infestation
  • Disease

Let’s take a closer look at each of these causes and how to identify and fix them.

snake plant has brown tips

How to Prevent Brown Tips on Snake Plants

There are a few things you can do to prevent brown tips on your snake plant.

  • Water your snake plant correctly. Snake plants are drought-tolerant plants, so you don’t need to water them often. However, it is important to make sure that the soil is dry before you water it again.
  • Give your snake plant enough sunlight. Snake plants need bright, indirect sunlight to thrive. If your plant is not getting enough light, the leaves will start to turn brown.
  • Fertilize your snake plant sparingly. Snake plants do not need a lot of fertilizer. Fertilize your plant once a year in the spring with a diluted fertilizer.
  • Repot your snake plant as needed. Snake plants can grow quite large, so you may need to repot them every few years. Repot your plant when the roots are starting to grow out of the drainage holes.

How to Treat Brown Tips on Snake Plants

If your snake plant has brown tips, there are a few things you can do to treat the problem.

  • First, check the soil moisture. Snake plants are succulents, and they need to dry out between waterings. If the soil is too wet, it can cause the roots to rot, which will eventually lead to brown tips.
  • If the soil is dry, give your snake plant a thorough watering. Make sure to water until the water drains out of the drainage hole in the bottom of the pot.
  • Once you have watered your snake plant, move it to a brighter location. Snake plants need bright, indirect sunlight to thrive. If they are not getting enough light, they will not be able to produce enough chlorophyll, which is the green pigment that helps plants photosynthesize.
  • If your snake plant is still getting brown tips after you have taken these steps, you may need to repot it.

    Snake plants need to be repotted every few years as they grow..

    When you repot your snake plant, make sure to use a pot that is one size larger than the current pot.

Home Remedies for Brown Tips on Snake Plants

There are a few home remedies that you can try to treat brown tips on snake plants.

1. Water your snake plant more frequently. If your snake plant is not getting enough water, the tips of the leaves will start to turn brown. Make sure to water your snake plant deeply so that the water reaches the roots.

2. Fertilize your snake plant more often. If your snake plant is not getting enough nutrients, the tips of the leaves will start to turn brown. Fertilize your snake plant with a balanced fertilizer once a month during the growing season.

3. Move your snake plant to a brighter location. If your snake plant is not getting enough sunlight, the tips of the leaves will start to turn brown. Move your snake plant to a location where it will receive more direct sunlight.

See also
Cherry Tree Florist | A Bloomin' Success!

4. Prune the brown tips off of your snake plant. If the brown tips on your snake plant are unsightly, you can prune them off. Use a sharp pair of scissors to cut the brown tips off of the leaves.

5. Repot your snake plant into a larger pot. If your snake plant is rootbound, the roots will not be able to get enough water and nutrients. Repot your snake plant into a larger pot so that the roots have more room to grow.

VWhen to Repot a Snake Plant with Brown Tips

You should repot a snake plant with brown tips if the roots are starting to grow out of the pot. This is a sign that the plant is outgrowing its current pot and needs more space to grow.

To repot your snake plant, you will need a new pot that is about 2 inches larger in diameter than the current pot. You will also need some fresh potting soil.

To repot your snake plant, follow these steps:

  1. Gently remove the snake plant from its current pot.
  2. Loosen the roots of the snake plant so that they are not tightly packed together.
  3. Place the snake plant in the new pot.
  4. Fill in the pot with fresh potting soil, leaving about an inch of space at the top.
  5. Water the snake plant thoroughly.

Once you have repotted your snake plant, you should water it regularly and give it plenty of sunlight. The brown tips should start to turn green again within a few weeks.

When to Water a Snake Plant with Brown Tips

Snake plants are drought-tolerant plants, so they can go for long periods of time without water. However, if your snake plant’s tips are browning, it may be a sign that the plant is not getting enough water. To determine if your snake plant needs water, check the soil. If the soil is dry to the touch, it is time to water the plant.

When watering a snake plant, it is important to do so deeply. This means that you should water the plant until the water comes out of the drainage holes in the bottom of the pot. Allow the excess water to drain away before placing the plant back in its saucer.

It is also important to water your snake plant at the right time of day.

The best time to water your snake plant is in the morning, before the sun has had a chance to heat up the soil..

This will help to prevent the roots of the plant from getting burned.

If you are not sure if your snake plant needs water, it is always better to err on the side of caution and wait a few days before watering the plant again. Overwatering can be just as harmful to a snake plant as underwatering, so it is important to find the right balance.

When to Move a Snake Plant with Brown Tips

Snake plants are relatively easy to care for, but they can still develop brown tips if they are not properly cared for. One of the reasons why snake plants may develop brown tips is if they are moved to a new location. This can be because the plant is not getting enough sunlight in its new location, or because the temperature or humidity is too different from what the plant is used to.

If you think that your snake plant is developing brown tips because it has been moved to a new location, you should try to slowly acclimate the plant to its new environment.

This means gradually increasing the amount of sunlight that the plant receives, and gradually adjusting the temperature and humidity levels..

You can also try to mist the plant regularly to help increase the humidity levels around it. If the brown tips do not improve after a few weeks, you may need to repot the plant into a new pot with fresh soil.

See also
Hydroponic Flowers: A Blooming Success Story

When to Move a Snake Plant with Brown Tips

If your snake plant is getting brown tips, it may be because it is not getting enough light. Moving the plant to a brighter location may help to improve the condition of the leaves. However, be sure to gradually increase the amount of light that the plant receives, as too much sudden light can damage the leaves.

If you are not able to move the plant to a brighter location, you can try increasing the humidity around the plant. This can be done by placing the plant on a pebble tray filled with water, or by misting the leaves regularly.

If you have tried both of these methods and the brown tips are not improving, you may need to repot the plant. When repotting, be sure to use a well-draining soil and a pot that is the correct size for the plant.

If you are still having trouble with brown tips on your snake plant, you may want to consult with a gardening expert.

FAQ

Q: What causes brown tips on snake plants?

A: There are a few possible causes of brown tips on snake plants, including:

Not enough water: Snake plants are succulents, which means they store water in their leaves. If they do not get enough water, the leaves will start to turn brown and eventually die.
Too much water: Snake plants are also susceptible to root rot if they are overwatered. This can also cause the leaves to turn brown.
Not enough sunlight: Snake plants need bright, indirect sunlight to thrive. If they do not get enough sunlight, the leaves will start to turn brown.

Q: How can I prevent brown tips on my snake plant?

A: To prevent brown tips on your snake plant, you can:

Water your snake plant regularly, but only when the soil is dry to the touch.
Make sure your snake plant is getting bright, indirect sunlight.
Repot your snake plant if it is rootbound.

Q: How can I treat brown tips on my snake plant?

A: If your snake plant has already developed brown tips, you can try to treat them by:

Pruning off the brown tips.
Watering your snake plant more frequently.
Moving your snake plant to a brighter location.
Repotting your snake plant if it is rootbound.

Katie Owen
Follow Me

Leave a Reply

Your email address will not be published. Required fields are marked *